Appearance
Description
Wind and solar power system consists of solar modules,wind turbine,controller, battery and inverter sections.Solar and wind power systems convert solar wind into electricity to charge the battery ,and then through the controller, and finally through the inverter powered electricity load.The advantage of this system is the high reliability of power supply,
operation and maintenance cost is low,due to the strong complementarity of the sun and the wind, wind and solar power generation system to make up for the defects of wind and photovoltaic sttand-alone system resources.
Wind and solar power system consists of solar modules,wind turbine,controller,battery and inverter sections.Including photovoltaic
systems and wind power systems convert solar and wind energy into electricity,and then charge the battery through the controller,and
finally through the inverter powered electricity load. The advantage of this system is to supply high reliability ,low operation and
maintenance costs.Due to the strong complementarity of solar and wind energy generating system complementary scenery make up
for the defects of wind power and photoelectric pack and inverter link generic, so can reduce wind and solar power the cost of the system.
Solar and wind energy is the most common natural resources, but also an inexhaustible supply of renewable energy.Solar and wind energy
are highly complementary in time and season:during the day sunlight,wind,no light at night,the wind is strong; the light intensity of the summer
sun and wind,the weak winter sun light intensity and wind, this complementarity wind/photovoltaic grid power generation system to best match
in terms of resources, to achieve continuous,stable power generation.In addition,wind power and photovoltaic power generation system is
universal aspects of the battery and inverter. The best rational allocation of wind and solar power generation system based on the user's electricity
load conditions and natural resources can ensure thereliability of the system, but also reduce the cost of power generation to meet the needs
of users of electricity,is the most reasonable, most reliable,most secure,most economical and most environmentally friendly power supply system.
Solar/wind stsyem
Diagram
Parameter
Model |
TLS1KWS |
TLS1.5KWS |
TLS2KWS |
TLS3KWS |
TLS4KWS |
TLS5KWS |
TLS6KWS | |||||||
Input |
MPPT voltage range |
DC 100~450V | ||||||||||||
Rated voltage |
DC 360V | |||||||||||||
Control system |
MPPT | |||||||||||||
Output |
Power |
1000W |
1500W |
2000W |
3000W |
4000W |
5000W |
6000W | ||||||
Voltage range |
Single phase AC 185 ~ 264V (Can adjust) | |||||||||||||
Rated voltage |
220VAC | |||||||||||||
Frequency |
Grid frequency50/60Hz(can adjust) | |||||||||||||
Phase |
Single phase | |||||||||||||
Power factor |
0.95 | |||||||||||||
Max current |
4.5A |
6.8A |
9A |
13.6A |
18A |
22A |
27A | |||||||
THD |
At rated power and the sine wave <3.5% | |||||||||||||
Efficiency |
97%(Euro efficiency:96.4%) | |||||||||||||
Structure |
Protection degree |
IP65/NEMA 4X | ||||||||||||
Cooling method |
Natural cooling | |||||||||||||
Noice |
<50dB | |||||||||||||
Data interface |
External RS 232C | |||||||||||||
Protection |
Inverter |
Input over voltage, output short circuit, overload overheat | ||||||||||||
Grid |
Anti-islanding(IEEE 1547),over/under voltage of grid, over/under frequency of grid | |||||||||||||
Environment |
Operation temperature range |
-10℃~40℃(50℃) | ||||||||||||
Stored temperature |
-25℃~60℃ | |||||||||||||
Relative humldity |
0~100% | |||||||||||||
Environment |
Have no corrosion gas, flammable gas, oil mist,dust etc. | |||||||||||||
Standby power consumption |
<25.0mW | |||||||||||||
Elevation |
6600feet (2000m ) | |||||||||||||
Size |
W*H*D |
442*380*110mm |
415*360*155 |
610*420*160 | ||||||||||
Weight |
KG |